This is the latest recevied telemetry packets stored in our database for station/object WHTANK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780629888 | 4.2 VDC | 1.38 VDC | 0 | 0 | 0 |
| 1780629287 | 4.2 VDC | 1.5 VDC | 0 | 0 | 0 |
| 1780628689 | 4.2 VDC | 2.34 VDC | 0 | 0 | 0 |
| 1780628089 | 4.2 VDC | 5.34 VDC | 0 | 0 | 0 |
| 1780627485 | 4.2 VDC | 4.44 VDC | 0 | 0 | 0 |
| 1780626884 | 4.2 VDC | 10.88 VDC | 0 | 0 | 0 |
| 1780626283 | 4.2 VDC | 13.48 VDC | 0 | 0 | 0 |
| 1780625683 | 4.2 VDC | 14.82 VDC | 0 | 0 | 0 |
| 1780625086 | 4.2 VDC | 15.64 VDC | 0 | 0 | 0 |
| 1780624482 | 4.2 VDC | 16.2 VDC | 0 | 0 | 0 |
| 1780623882 | 4.2 VDC | 16.62 VDC | 0 | 0 | 0 |
| 1780623285 | 4.21 VDC | 16.94 VDC | 0 | 0 | 0 |
| 1780622681 | 4.21 VDC | 17.2 VDC | 0 | 0 | 0 |
| 1780622081 | 4.21 VDC | 17.4 VDC | 0 | 0 | 0 |
| 1780621484 | 4.21 VDC | 17.64 VDC | 0 | 0 | 0 |
| 1780620883 | 4.21 VDC | 17.8 VDC | 0 | 0 | 0 |
| 1780620280 | 4.21 VDC | 17.98 VDC | 0 | 0 | 0 |
| 1780619680 | 4.21 VDC | 18.54 VDC | 0 | 0 | 0 |
| 1780619079 | 4.21 VDC | 19.14 VDC | 0 | 0 | 0 |
| 1780618478 | 4.21 VDC | 19.72 VDC | 0 | 0 | 0 |
| 1780617878 | 4.21 VDC | 20.18 VDC | 0 | 0 | 0 |
| 1780617277 | 4.21 VDC | 20.54 VDC | 0 | 0 | 0 |
| 1780616677 | 4.22 VDC | 20.8 VDC | 0 | 0 | 0 |
| 1780616080 | 4.22 VDC | 21.02 VDC | 0 | 0 | 0 |
| 1780615480 | 4.22 VDC | 21.18 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)