This is the latest recevied telemetry packets stored in our database for station/object YB0RWN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Voltage* | Current* |
|---|---|---|---|---|---|
| 1780651896 | 36 °C | 42 %RH | 1007 hPa | 4 V | 108 mA |
| 1780649997 | 36 °C | 41 %RH | 1007 hPa | 4 V | 108 mA |
| 1780646199 | 36 °C | 41 %RH | 1007 hPa | 4 V | 107 mA |
| 1780644300 | 37 °C | 40 %RH | 1007 hPa | 4 V | 108 mA |
| 1780642401 | 37 °C | 39 %RH | 1008 hPa | 4 V | 109 mA |
| 1780640502 | 36 °C | 37 %RH | 1008 hPa | 4 V | 108 mA |
| 1780638603 | 36 °C | 38 %RH | 1008 hPa | 4 V | 108 mA |
| 1780636704 | 36 °C | 38 %RH | 1009 hPa | 4 V | 116 mA |
| 1780634805 | 36 °C | 38 %RH | 1009 hPa | 4 V | 108 mA |
| 1780632906 | 35 °C | 40 %RH | 1010 hPa | 4 V | 113 mA |
| 1780631007 | 36 °C | 40 %RH | 1010 hPa | 4 V | 110 mA |
| 1780629108 | 35 °C | 43 %RH | 1010 hPa | 4 V | 107 mA |
| 1780627209 | 34 °C | 44 %RH | 1011 hPa | 4 V | 107 mA |
| 1780625310 | 34 °C | 45 %RH | 1011 hPa | 4 V | 109 mA |
| 1780623411 | 33 °C | 45 %RH | 1011 hPa | 4 V | 110 mA |
| 1780621512 | 33 °C | 46 %RH | 1011 hPa | 4 V | 108 mA |
| 1780619613 | 33 °C | 47 %RH | 1011 hPa | 4 V | 107 mA |
| 1780617714 | 33 °C | 48 %RH | 1011 hPa | 4 V | 107 mA |
| 1780615815 | 33 °C | 45 %RH | 1010 hPa | 4 V | 108 mA |
| 1780613916 | 33 °C | 47 %RH | 1010 hPa | 4 V | 107 mA |
| 1780612017 | 33 °C | 47 %RH | 1010 hPa | 4 V | 107 mA |
| 1780610119 | 33 °C | 47 %RH | 1010 hPa | 4 V | 118 mA |
| 1780608220 | 33 °C | 47 %RH | 1009 hPa | 4 V | 108 mA |
| 1780606321 | 33 °C | 46 %RH | 1009 hPa | 4 V | 215 mA |
| 1780605411 | 33 °C | 47 %RH | 1009 hPa | 4 V | 108 mA |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Voltage: 0, 1, 0
Current: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)