This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791146424 | 39 Count | 101 Count | 31 Count | 4.16 VDC | 0 VDC |
| 1791145543 | 28 Count | 81 Count | 25 Count | 4.15 VDC | 0 VDC |
| 1791144642 | 21 Count | 61 Count | 19 Count | 4.16 VDC | 0 VDC |
| 1791143741 | 15 Count | 46 Count | 14 Count | 4.16 VDC | 0 VDC |
| 1791142840 | 8 Count | 29 Count | 8 Count | 4.16 VDC | 0 VDC |
| 1791141940 | 345 Count | 1021 Count | 304 Count | 4.16 VDC | 0 VDC |
| 1791141039 | 337 Count | 999 Count | 297 Count | 4.16 VDC | 0 VDC |
| 1791140138 | 334 Count | 982 Count | 295 Count | 4.16 VDC | 0 VDC |
| 1791139237 | 327 Count | 963 Count | 289 Count | 4.16 VDC | 0 VDC |
| 1791138336 | 322 Count | 951 Count | 285 Count | 4.16 VDC | 0 VDC |
| 1791137435 | 316 Count | 933 Count | 280 Count | 4.16 VDC | 0 VDC |
| 1791136534 | 312 Count | 917 Count | 277 Count | 4.16 VDC | 0 VDC |
| 1791135633 | 305 Count | 895 Count | 271 Count | 4.16 VDC | 0 VDC |
| 1791134732 | 285 Count | 861 Count | 252 Count | 4.16 VDC | 0 VDC |
| 1791133831 | 270 Count | 830 Count | 238 Count | 4.16 VDC | 0 VDC |
| 1791132931 | 266 Count | 817 Count | 235 Count | 4.16 VDC | 0 VDC |
| 1791132030 | 254 Count | 774 Count | 224 Count | 4.16 VDC | 0 VDC |
| 1791131129 | 218 Count | 703 Count | 189 Count | 4.16 VDC | 0 VDC |
| 1791130228 | 203 Count | 639 Count | 175 Count | 4.16 VDC | 0 VDC |
| 1791129327 | 193 Count | 591 Count | 166 Count | 4.16 VDC | 0 VDC |
| 1791128427 | 184 Count | 555 Count | 158 Count | 4.16 VDC | 0 VDC |
| 1791127526 | 178 Count | 535 Count | 153 Count | 4.15 VDC | 0 VDC |
| 1791126625 | 169 Count | 512 Count | 145 Count | 4.16 VDC | 0 VDC |
| 1791125724 | 156 Count | 486 Count | 133 Count | 4.15 VDC | 0 VDC |
| 1791123942 | 141 Count | 454 Count | 124 Count | 4.16 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)