This is the latest recevied telemetry packets stored in our database for station/object WB0BBE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780617325 | 11.98 Volts | 84.43 Deg.F | 0 | 0 | 0 |
| 1780616428 | 12.01 Volts | 84.43 Deg.F | 0 | 0 | 0 |
| 1780613743 | 12.1 Volts | 84.43 Deg.F | 0 | 0 | 0 |
| 1780611953 | 12.19 Volts | 85.31 Deg.F | 0 | 0 | 0 |
| 1780606582 | 11.98 Volts | 83.55 Deg.F | 0 | 0 | 0 |
| 1780596739 | 11.84 Volts | 78.28 Deg.F | 0 | 0 | 0 |
| 1780591368 | 11.95 Volts | 75.64 Deg.F | 0 | 0 | 0 |
| 1780589578 | 11.95 Volts | 75.64 Deg.F | 0 | 0 | 0 |
| 1780588684 | 11.84 Volts | 75.64 Deg.F | 0 | 0 | 0 |
| 1780586895 | 11.87 Volts | 74.76 Deg.F | 0 | 0 | 0 |
| 1780584209 | 11.81 Volts | 69.49 Deg.F | 0 | 0 | 0 |
| 1780582422 | 11.63 Volts | 64.21 Deg.F | 0 | 0 | 0 |
| 1780581528 | 11.49 Volts | 63.34 Deg.F | 0 | 0 | 0 |
| 1780580633 | 11.98 Volts | 63.34 Deg.F | 0 | 0 | 0 |
| 1780578843 | 11.98 Volts | 65.09 Deg.F | 0 | 0 | 0 |
| 1780577949 | 11.98 Volts | 64.21 Deg.F | 0 | 0 | 0 |
| 1780576160 | 11.98 Volts | 64.21 Deg.F | 0 | 0 | 0 |
| 1780574371 | 11.98 Volts | 64.21 Deg.F | 0 | 0 | 0 |
| 1780573477 | 11.98 Volts | 65.09 Deg.F | 0 | 0 | 0 |
| 1780572584 | 11.98 Volts | 65.09 Deg.F | 0 | 0 | 0 |
| 1780571689 | 12.01 Volts | 65.09 Deg.F | 0 | 0 | 0 |
| 1780570794 | 12.01 Volts | 65.97 Deg.F | 0 | 0 | 0 |
| 1780569903 | 12.01 Volts | 65.97 Deg.F | 0 | 0 | 0 |
| 1780569006 | 11.98 Volts | 65.97 Deg.F | 0 | 0 | 0 |
| 1780568111 | 11.98 Volts | 65.97 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)