This is the latest recevied telemetry packets stored in our database for station/object LA8GKA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791122064 | 6.56 VDC | 0 | 0 | 0 | 0 |
| 1791121164 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791120264 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791119364 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791118464 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791117564 | 7.18 VDC | 0 | 0 | 0 | 0 |
| 1791116664 | 6.72 VDC | 0 | 0 | 0 | 0 |
| 1791115763 | 7.48 VDC | 0 | 0 | 0 | 0 |
| 1791114863 | 7.02 VDC | 0 | 0 | 0 | 0 |
| 1791113963 | 7.02 VDC | 0 | 0 | 0 | 0 |
| 1791113063 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791112163 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791111262 | 6.86 VDC | 0 | 0 | 0 | 0 |
| 1791110362 | 6.86 VDC | 0 | 0 | 0 | 0 |
| 1791109462 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791108561 | 6.86 VDC | 0 | 0 | 0 | 0 |
| 1791107660 | 6.56 VDC | 0 | 0 | 0 | 0 |
| 1791106760 | 7.02 VDC | 0 | 0 | 0 | 0 |
| 1791105860 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791104960 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791104060 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791103160 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791102260 | 6.56 VDC | 0 | 0 | 0 | 0 |
| 1791101359 | 7.18 VDC | 0 | 0 | 0 | 0 |
| 1791100459 | 6.56 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)