This is the latest recevied telemetry packets stored in our database for station/object M7CWV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775513511 | 7489 | 3292 | 0 | 0 | 0 |
| 1775513144 | 1315 | 0 | 0 | 0 | 0 |
| 1775510271 | 2534 | 7379 | 1705 | 4169 | 2731 |
| 1775509978 | 4626 | 2574 | 0 | 0 | 0 |
| 1775507745 | 3509 | 1307 | 460 | 1602 | 7644 |
| 1775507001 | 416 | 2064 | 254 | 0 | 0 |
| 1775505994 | 5829 | 6427 | 4115 | 3066 | 0 |
| 1775500838 | 7769 | 8043 | 1739 | 0 | 0 |
| 1775499937 | 7543 | 5576 | 6811 | 2786 | 6897 |
| 1775497504 | 6857 | 0 | 0 | 0 | 0 |
| 1775496377 | 2970 | 98 | 3671 | 313 | 5535 |
| 1775495176 | 2377 | 0 | 0 | 0 | 0 |
| 1775494312 | 8066 | 0 | 0 | 0 | 0 |
| 1775493469 | 6092 | 3876 | 5204 | 1929 | 0 |
| 1775492943 | 4807 | 5960 | 4092 | 0 | 0 |
| 1775491784 | 4471 | 3128 | 2059 | 3504 | 1465 |
| 1775489793 | 3257 | 2030 | 744 | 5493 | 0 |
| 1775489477 | 7871 | 2619 | 3952 | 2437 | 0 |
| 1775488898 | 3861 | 7816 | 4489 | 2990 | 2937 |
| 1775486981 | 7110 | 4469 | 7540 | 0 | 0 |
| 1775486570 | 7006 | 0 | 0 | 0 | 0 |
| 1775485885 | 4760 | 6455 | 6954 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)