This is the latest recevied telemetry packets stored in our database for station/object LU6EEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785835263 | 293 Count | 285 Count | 198 Count | 4.13 VDC | 0 VDC |
| 1785834363 | 291 Count | 284 Count | 197 Count | 4.13 VDC | 0 VDC |
| 1785833462 | 289 Count | 283 Count | 196 Count | 4.13 VDC | 0 VDC |
| 1785832562 | 287 Count | 282 Count | 195 Count | 4.13 VDC | 0 VDC |
| 1785831661 | 285 Count | 281 Count | 194 Count | 4.13 VDC | 0 VDC |
| 1785830760 | 283 Count | 280 Count | 193 Count | 4.13 VDC | 0 VDC |
| 1785829860 | 281 Count | 279 Count | 192 Count | 4.13 VDC | 0 VDC |
| 1785828959 | 279 Count | 278 Count | 191 Count | 4.13 VDC | 0 VDC |
| 1785828058 | 277 Count | 277 Count | 190 Count | 4.13 VDC | 0 VDC |
| 1785827173 | 275 Count | 276 Count | 189 Count | 4.13 VDC | 0 VDC |
| 1785826272 | 273 Count | 275 Count | 188 Count | 4.13 VDC | 0 VDC |
| 1785825372 | 272 Count | 275 Count | 188 Count | 4.13 VDC | 0 VDC |
| 1785824471 | 270 Count | 274 Count | 187 Count | 4.13 VDC | 0 VDC |
| 1785823571 | 268 Count | 273 Count | 186 Count | 4.13 VDC | 0 VDC |
| 1785822670 | 266 Count | 272 Count | 185 Count | 4.13 VDC | 0 VDC |
| 1785821769 | 264 Count | 271 Count | 184 Count | 4.13 VDC | 0 VDC |
| 1785820868 | 262 Count | 270 Count | 183 Count | 4.13 VDC | 0 VDC |
| 1785819968 | 260 Count | 269 Count | 182 Count | 4.13 VDC | 0 VDC |
| 1785819067 | 258 Count | 268 Count | 181 Count | 4.13 VDC | 0 VDC |
| 1785818167 | 256 Count | 267 Count | 180 Count | 4.13 VDC | 0 VDC |
| 1785817266 | 254 Count | 266 Count | 179 Count | 4.13 VDC | 0 VDC |
| 1785816365 | 253 Count | 266 Count | 179 Count | 4.13 VDC | 0 VDC |
| 1785815465 | 250 Count | 264 Count | 177 Count | 4.13 VDC | 0 VDC |
| 1785814564 | 249 Count | 264 Count | 177 Count | 4.13 VDC | 0 VDC |
| 1785813663 | 244 Count | 260 Count | 173 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)