This is the latest recevied telemetry packets stored in our database for station/object OK4AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1791129997 | 27.7 C | 44.95 % | 986.4 hPa | 3.5 V | 12 |
| 1791129408 | 27.76 C | 44.9 % | 986.3 hPa | 3.5 V | 12 |
| 1791129215 | 27.78 C | 44.91 % | 986.3 hPa | 3.51 V | 12 |
| 1791128562 | 27.85 C | 44.9 % | 986.3 hPa | 3.51 V | 12 |
| 1791127912 | 27.93 C | 44.85 % | 986.3 hPa | 3.51 V | 12 |
| 1791127785 | 27.94 C | 44.88 % | 986.3 hPa | 3.52 V | 12 |
| 1791127770 | 27.94 C | 44.88 % | 986.2 hPa | 3.5 V | 12 |
| 1791127753 | 27.95 C | 44.88 % | 986.2 hPa | 3.52 V | 12 |
| 1791127736 | 27.95 C | 44.88 % | 986.2 hPa | 3.52 V | 12 |
| 1791127725 | 27.95 C | 44.88 % | 986.2 hPa | 3.52 V | 12 |
| 1791127069 | 27.98 C | 44.9 % | 986.3 hPa | 3.53 V | 12 |
| 1791126526 | 27.98 C | 45 % | 986.3 hPa | 3.53 V | 12 |
| 1791125871 | 27.96 C | 45.1 % | 986.3 hPa | 3.53 V | 12 |
| 1791125658 | 27.95 C | 45.12 % | 986.3 hPa | 3.54 V | 12 |
| 1791125638 | 27.95 C | 45.12 % | 986.3 hPa | 3.54 V | 12 |
| 1791125614 | 27.95 C | 45.11 % | 986.3 hPa | 3.52 V | 12 |
| 1791125601 | 27.95 C | 45.11 % | 986.3 hPa | 3.54 V | 12 |
| 1791125213 | 27.98 C | 45.05 % | 986.3 hPa | 3.54 V | 12 |
| 1791124558 | 28.03 C | 44.98 % | 986.4 hPa | 3.55 V | 12 |
| 1791123902 | 27.98 C | 44.93 % | 986.4 hPa | 3.55 V | 12 |
| 1791123613 | 27.95 C | 44.92 % | 986.4 hPa | 3.56 V | 12 |
| 1791122958 | 27.88 C | 44.9 % | 986.4 hPa | 3.56 V | 12 |
| 1791122892 | 27.88 C | 44.87 % | 986.4 hPa | 3.56 V | 12 |
| 1791122883 | 27.88 C | 44.87 % | 986.4 hPa | 3.56 V | 12 |
| 1791122872 | 27.88 C | 44.87 % | 986.4 hPa | 3.56 V | 12 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)