This is the latest recevied telemetry packets stored in our database for station/object HB9EZW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780632562 | 718 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780631659 | 717 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780630756 | 716 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780629853 | 715 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780628950 | 714 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780628047 | 713 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780627144 | 712 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780626241 | 711 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780625338 | 710 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780624435 | 709 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780623532 | 708 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780622629 | 707 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780621725 | 706 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780620822 | 705 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780619919 | 704 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780619016 | 703 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780618113 | 702 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780617210 | 701 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780616307 | 700 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780615404 | 699 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780613598 | 697 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780612695 | 696 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780611793 | 695 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780610957 | 694 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780610054 | 693 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)