This is the latest recevied telemetry packets stored in our database for station/object LA7DHA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785927185 | 4.53 VDC | 29.5 C | 28.74 % | 0 | 0 |
| 1785926828 | 4.53 VDC | 29.2 C | 28.99 % | 0 | 0 |
| 1785926662 | 4.53 VDC | 29.1 C | 29.27 % | 0 | 0 |
| 1785926229 | 4.53 VDC | 29.2 C | 29.65 % | 0 | 0 |
| 1785925953 | 4.53 VDC | 29.2 C | 29.82 % | 0 | 0 |
| 1785925540 | 4.53 VDC | 29.3 C | 29.76 % | 0 | 0 |
| 1785925172 | 4.53 VDC | 29.4 C | 29.61 % | 0 | 0 |
| 1785924877 | 4.54 VDC | 29.4 C | 29.51 % | 0 | 0 |
| 1785924645 | 4.54 VDC | 29.4 C | 29.52 % | 0 | 0 |
| 1785920693 | 4.53 VDC | 28.3 C | 30.6 % | 0 | 0 |
| 1785919942 | 4.53 VDC | 27.9 C | 31.9 % | 0 | 0 |
| 1785918805 | 4.53 VDC | 27.1 C | 32.16 % | 0 | 0 |
| 1785918639 | 4.53 VDC | 27 C | 32.18 % | 0 | 0 |
| 1785917278 | 4.53 VDC | 26.7 C | 33.18 % | 0 | 0 |
| 1785916996 | 4.53 VDC | 26.6 C | 33.5 % | 0 | 0 |
| 1785916504 | 4.52 VDC | 26.1 C | 35.38 % | 0 | 0 |
| 1785916290 | 4.53 VDC | 25.8 C | 36.58 % | 0 | 0 |
| 1785916137 | 4.52 VDC | 25.6 C | 37.91 % | 0 | 0 |
| 1785915708 | 4.52 VDC | 24.4 C | 43.53 % | 0 | 0 |
| 1785915457 | 4.51 VDC | 23 C | 51.23 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)