This is the latest recevied telemetry packets stored in our database for station/object SR9VJK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791085358 | 0 Count | 218 Count | 0 Count | 0 VDC | 0 VDC |
| 1791083558 | 0 Count | 120 Count | 0 Count | 0 VDC | 0 VDC |
| 1791081756 | 0 Count | 1087 Count | 0 Count | 0 VDC | 0 VDC |
| 1791079955 | 0 Count | 984 Count | 0 Count | 0 VDC | 0 VDC |
| 1791078155 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1791076355 | 0 Count | 783 Count | 0 Count | 0 VDC | 0 VDC |
| 1791074555 | 0 Count | 668 Count | 0 Count | 0 VDC | 0 VDC |
| 1791072755 | 0 Count | 569 Count | 0 Count | 0 VDC | 0 VDC |
| 1791070955 | 0 Count | 506 Count | 0 Count | 0 VDC | 0 VDC |
| 1791069155 | 0 Count | 372 Count | 0 Count | 0 VDC | 0 VDC |
| 1791067355 | 0 Count | 269 Count | 0 Count | 0 VDC | 0 VDC |
| 1791065554 | 0 Count | 155 Count | 0 Count | 0 VDC | 0 VDC |
| 1791063754 | 0 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1791061954 | 0 Count | 1033 Count | 0 Count | 0 VDC | 0 VDC |
| 1791060154 | 0 Count | 951 Count | 0 Count | 0 VDC | 0 VDC |
| 1791058354 | 0 Count | 884 Count | 0 Count | 0 VDC | 0 VDC |
| 1791056554 | 0 Count | 789 Count | 0 Count | 0 VDC | 0 VDC |
| 1791054754 | 0 Count | 718 Count | 0 Count | 0 VDC | 0 VDC |
| 1791052954 | 0 Count | 652 Count | 0 Count | 0 VDC | 0 VDC |
| 1791051154 | 0 Count | 515 Count | 0 Count | 0 VDC | 0 VDC |
| 1791049353 | 0 Count | 331 Count | 0 Count | 0 VDC | 0 VDC |
| 1791047553 | 0 Count | 217 Count | 0 Count | 0 VDC | 0 VDC |
| 1791045755 | 0 Count | 1031 Count | 0 Count | 0 VDC | 0 VDC |
| 1791043955 | 0 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1791042155 | 0 Count | 694 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)