This is the latest recevied telemetry packets stored in our database for station/object F4LZC-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791093802 | 641 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791092899 | 640 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791091091 | 638 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791090188 | 637 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791089284 | 636 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791088380 | 635 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791087477 | 634 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791086658 | 629 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791085754 | 628 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791084850 | 627 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791083947 | 626 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791083043 | 625 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791082139 | 624 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791081236 | 623 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791080332 | 622 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791079429 | 621 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791078525 | 620 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791077621 | 619 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791076718 | 618 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791075814 | 617 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791074910 | 616 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791074007 | 615 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791073103 | 614 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791072199 | 613 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791071296 | 612 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)