This is the latest recevied telemetry packets stored in our database for station/object 9M2DAU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785838851 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785837051 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785836150 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785834354 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785833429 | 4.05 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785832529 | 4.05 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785829828 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785828028 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785827127 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785826227 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785822977 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785822605 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785821705 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785821253 | 4.02 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785819905 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785819004 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785818104 | 4.04 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785817204 | 4.04 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785816448 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785816304 | 4.04 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785815404 | 4.04 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785814504 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1785814382 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785812703 | 4.04 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1785810879 | 4.02 VDC | 2.46 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)