This is the latest recevied telemetry packets stored in our database for station/object KM4ZIA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1775207855 | 4.38 Volts | -8 Deg C | 6 | 1 | 1 |
| 1775207726 | 4.38 Volts | -9 Deg C | 6 | 1 | 1 |
| 1775207597 | 4.48 Volts | -12 Deg C | 6 | 6 | 1 |
| 1775207474 | 4.36 Volts | -10 Deg C | 6 | 1 | 1 |
| 1775207222 | 4.38 Volts | -13 Deg C | 7 | 1 | 1 |
| 1775207084 | 4.44 Volts | -16 Deg C | 7 | 6 | 1 |
| 1775206292 | 4.38 Volts | -10 Deg C | 7 | 6 | 1 |
| 1775205627 | 4.34 Volts | -15 Deg C | 8 | 6 | 1 |
| 1775205099 | 4.54 Volts | -15 Deg C | 8 | 6 | 1 |
| 1775204618 | 4.5 Volts | -17 Deg C | 9 | 1 | 1 |
| 1775204498 | 4.42 Volts | -16 Deg C | 9 | 1 | 1 |
| 1775204120 | 4.46 Volts | -16 Deg C | 9 | 1 | 1 |
| 1775201963 | 3.7 Volts | -18 Deg C | 10 | 1 | 1 |
| 1775201795 | 4.02 Volts | -16 Deg C | 7 | 1 | 1 |
| 1775200884 | 3.38 Volts | -16 Deg C | 7 | 1 | 1 |
| 1775151345 | 3.36 Volts | -13 Deg C | 9 | 1 | 1 |
| 1775151105 | 3.3 Volts | -23 Deg C | 9 | 1 | 1 |
| 1775150985 | 3.48 Volts | -18 Deg C | 9 | 1 | 1 |
| 1775150865 | 3.62 Volts | -17 Deg C | 11 | 1 | 1 |
| 1775150745 | 3.5 Volts | -16 Deg C | 11 | 1 | 1 |
| 1775150619 | 3.9 Volts | -12 Deg C | 11 | 6 | 1 |
| 1775150499 | 4 Volts | -18 Deg C | 11 | 6 | 1 |
| 1775150379 | 3.86 Volts | -22 Deg C | 11 | 1 | 1 |
| 1775150259 | 4.08 Volts | -16 Deg C | 11 | 6 | 1 |
| 1775150139 | 3.7 Volts | -10 Deg C | 10 | 1 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)