This is the latest recevied telemetry packets stored in our database for station/object SV2HQL-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791374971 | 37.2 C | 1028.5 hPa | 0 | 0 | 0 |
| 1791374571 | 39.4 C | 1026.88 hPa | 0 | 0 | 0 |
| 1791374215 | 37.5 C | 1027 hPa | 0 | 0 | 0 |
| 1791373987 | 36.8 C | 1027.38 hPa | 0 | 0 | 0 |
| 1791373607 | 41.2 C | 1030.63 hPa | 0 | 0 | 0 |
| 1791373384 | 39.6 C | 1028.38 hPa | 0 | 0 | 0 |
| 1791373221 | 37.8 C | 1027.13 hPa | 0 | 0 | 0 |
| 1791372651 | 39.1 C | 1031 hPa | 0 | 0 | 0 |
| 1791372482 | 41.8 C | 1027.38 hPa | 0 | 0 | 0 |
| 1791372321 | 39 C | 1028 hPa | 0 | 0 | 0 |
| 1791372048 | 32 C | 1027.75 hPa | 0 | 0 | 0 |
| 1791371877 | 30.6 C | 1029.25 hPa | 0 | 0 | 0 |
| 1791371638 | 30.4 C | 1026.88 hPa | 0 | 0 | 0 |
| 1791371141 | 31.6 C | 1029 hPa | 0 | 0 | 0 |
| 1791369100 | 40.1 C | 1028.63 hPa | 0 | 0 | 0 |
| 1791360246 | 30.9 C | 1031 hPa | 0 | 0 | 0 |
| 1791355371 | 30.8 C | 1032.88 hPa | 0 | 0 | 0 |
| 1791355159 | 27.7 C | 1030.13 hPa | 0 | 0 | 0 |
| 1791354764 | 31.7 C | 1030.63 hPa | 0 | 0 | 0 |
| 1791353019 | 28.8 C | 1029.25 hPa | 0 | 0 | 0 |
| 1791352670 | 27.2 C | 0 hPa | 0 | 0 | 0 |
| 1791351858 | 27 C | 1028.88 hPa | 0 | 0 | 0 |
| 1791351612 | 26.9 C | 1030.25 hPa | 0 | 0 | 0 |
| 1791351375 | 26.3 C | 1025.5 hPa | 0 | 0 | 0 |
| 1791351217 | 26.1 C | 1029.88 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)