This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791135279 | 3.86 VDC | 1.18 VDC | 0 | 0 | 0 |
| 1791134558 | 3.89 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1791133838 | 3.89 VDC | 1.18 VDC | 0 | 0 | 0 |
| 1791133118 | 3.88 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1791132397 | 3.88 VDC | 1.36 VDC | 0 | 0 | 0 |
| 1791131677 | 3.89 VDC | 1.96 VDC | 0 | 0 | 0 |
| 1791130956 | 3.89 VDC | 3.64 VDC | 0 | 0 | 0 |
| 1791130236 | 3.9 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1791129516 | 3.88 VDC | 5.04 VDC | 0 | 0 | 0 |
| 1791128796 | 3.93 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1791128075 | 3.92 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1791127355 | 3.92 VDC | 6.54 VDC | 0 | 0 | 0 |
| 1791126635 | 3.94 VDC | 5.1 VDC | 0 | 0 | 0 |
| 1791125915 | 3.94 VDC | 6.1 VDC | 0 | 0 | 0 |
| 1791125194 | 3.9 VDC | 5.72 VDC | 0 | 0 | 0 |
| 1791124474 | 3.91 VDC | 7.32 VDC | 0 | 0 | 0 |
| 1791123754 | 3.91 VDC | 8.12 VDC | 0 | 0 | 0 |
| 1791123034 | 3.92 VDC | 7.6 VDC | 0 | 0 | 0 |
| 1791122313 | 3.91 VDC | 8.04 VDC | 0 | 0 | 0 |
| 1791121593 | 3.92 VDC | 8.24 VDC | 0 | 0 | 0 |
| 1791120873 | 3.93 VDC | 8.3 VDC | 0 | 0 | 0 |
| 1791120153 | 3.94 VDC | 8.26 VDC | 0 | 0 | 0 |
| 1791119432 | 3.92 VDC | 8.06 VDC | 0 | 0 | 0 |
| 1791118712 | 3.94 VDC | 8.4 VDC | 0 | 0 | 0 |
| 1791117992 | 3.93 VDC | 7.88 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)