This is the latest recevied telemetry packets stored in our database for station/object LU6MHO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780631303 | 362 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780630399 | 361 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780629496 | 360 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780628592 | 359 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780627689 | 358 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780626785 | 357 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780625964 | 356 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780625060 | 355 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780624157 | 354 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780623253 | 353 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780622350 | 352 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780621447 | 351 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780620543 | 350 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780619640 | 349 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780618737 | 348 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780617833 | 347 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780616930 | 346 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780616026 | 345 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780614220 | 343 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780613316 | 342 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780612413 | 341 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780611510 | 340 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780610606 | 339 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780609703 | 338 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1780608799 | 337 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)