This is the latest recevied telemetry packets stored in our database for station/object SV6GIM-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780622725 | 22.7 C | 1023.5 hPa | 0 | 0 | 0 |
| 1780621821 | 22.7 C | 1022.63 hPa | 0 | 0 | 0 |
| 1780620917 | 22.8 C | 1022.38 hPa | 0 | 0 | 0 |
| 1780620013 | 22.9 C | 1022.88 hPa | 0 | 0 | 0 |
| 1780619109 | 23 C | 1022 hPa | 0 | 0 | 0 |
| 1780618205 | 23.1 C | 1022.25 hPa | 0 | 0 | 0 |
| 1780617301 | 23.3 C | 1022 hPa | 0 | 0 | 0 |
| 1780616397 | 23.4 C | 1022.38 hPa | 0 | 0 | 0 |
| 1780615493 | 23.5 C | 1022 hPa | 0 | 0 | 0 |
| 1780613685 | 23.6 C | 1022.5 hPa | 0 | 0 | 0 |
| 1780612781 | 23.5 C | 1022.5 hPa | 0 | 0 | 0 |
| 1780611877 | 23.6 C | 1022.88 hPa | 0 | 0 | 0 |
| 1780610973 | 23.5 C | 1022.63 hPa | 0 | 0 | 0 |
| 1780610069 | 23.5 C | 1023.88 hPa | 0 | 0 | 0 |
| 1780609165 | 23.6 C | 1023.5 hPa | 0 | 0 | 0 |
| 1780608261 | 23.7 C | 1022.88 hPa | 0 | 0 | 0 |
| 1780607357 | 23.8 C | 1022.75 hPa | 0 | 0 | 0 |
| 1780606453 | 23.9 C | 1023.13 hPa | 0 | 0 | 0 |
| 1780605549 | 24.3 C | 1023.25 hPa | 0 | 0 | 0 |
| 1780604645 | 24.2 C | 1023.38 hPa | 0 | 0 | 0 |
| 1780602837 | 24.3 C | 1022.13 hPa | 0 | 0 | 0 |
| 1780601933 | 23.7 C | 1022 hPa | 0 | 0 | 0 |
| 1780601029 | 23.3 C | 1021.25 hPa | 0 | 0 | 0 |
| 1780600125 | 20.8 C | 1020.88 hPa | 0 | 0 | 0 |
| 1780599221 | 22.2 C | 1020.88 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)