APRS Track Direct

My position About ☰

reset

HS2AC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2AC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAT*	CPU*
1791107034	0 °C	81.2 %RH	3.94 V	32 °C
1791106029	0 °C	80.9 %RH	3.94 V	33 °C
1791103891	0 °C	83.1 %RH	3.94 V	35 °C
1791103795	0 °C	72.5 %RH	3.93 V	36 °C
1791099574	0 °C	69 %RH	3.94 V	33 °C
1791098493	0 °C	68 %RH	3.93 V	33 °C
1791096410	0 °C	66.7 %RH	3.94 V	40 °C
1791096367	0 °C	66.7 %RH	3.94 V	38 °C
1791095246	0 °C	2.8 %RH	3.91 V	41 °C
1791095217	0 °C	2.8 %RH	3.91 V	40 °C
1791095174	0 °C	2.8 %RH	3.91 V	38 °C
1791094033	1.65 °C	74.2 %RH	3.89 V	41 °C
1791093988	0 °C	66.9 %RH	3.9 V	39 °C
1791093949	0 °C	66 %RH	3.91 V	36 °C
1791092908	0 °C	65.8 %RH	3.91 V	43 °C
1791092867	0.82 °C	73.8 %RH	3.91 V	42 °C
1791092832	0.71 °C	72.4 %RH	3.89 V	42 °C
1791092784	1.56 °C	71.7 %RH	3.91 V	42 °C
1791092738	0.86 °C	72.5 %RH	3.89 V	42 °C
1791092696	0 °C	65.4 %RH	3.89 V	43 °C
1791092652	0 °C	63.1 %RH	3.9 V	41 °C
1791092611	0 °C	64.2 %RH	3.91 V	41 °C
1791092572	0 °C	66.7 %RH	3.91 V	39 °C
1791092530	0 °C	68.1 %RH	3.92 V	36 °C
1791092520	0 °C	68.1 %RH	3.92 V	35 °C

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAT: 0, 0.01, 0

CPU: 0, 0.1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)