APRS Track Direct

My position About ☰

reset

IZ2XCK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ2XCK-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1785876283	0 Pkt/10m	0 Pkt/10m	4.27 Volt	12.6 Volt	0.27 Ampere
1785875082	0 Pkt/10m	0 Pkt/10m	4.29 Volt	12.6 Volt	0.27 Ampere
1785873882	0 Pkt/10m	0 Pkt/10m	4.29 Volt	12.6 Volt	0.26 Ampere
1785872681	0 Pkt/10m	0 Pkt/10m	4.17 Volt	12.6 Volt	0.27 Ampere
1785871481	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.6 Volt	0.27 Ampere
1785870281	0 Pkt/10m	0 Pkt/10m	4.31 Volt	12.6 Volt	0.27 Ampere
1785867880	0 Pkt/10m	0 Pkt/10m	4.27 Volt	12.6 Volt	0.25 Ampere
1785866679	0 Pkt/10m	0 Pkt/10m	4.23 Volt	12.6 Volt	0.22 Ampere
1785865479	0 Pkt/10m	0 Pkt/10m	4.23 Volt	12.6 Volt	0.2 Ampere
1785864279	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.6 Volt	0.17 Ampere
1785863078	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.7 Volt	0.14 Ampere
1785861878	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.7 Volt	0.12 Ampere
1785860677	0 Pkt/10m	0 Pkt/10m	4.33 Volt	12.7 Volt	0.1 Ampere
1785859477	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.8 Volt	-0.03 Ampere
1785858277	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.9 Volt	0.19 Ampere
1785857066	0 Pkt/10m	0 Pkt/10m	4.35 Volt	13.3 Volt	0.25 Ampere
1785855866	0 Pkt/10m	0 Pkt/10m	4.35 Volt	12.9 Volt	-0.03 Ampere
1785854666	0 Pkt/10m	0 Pkt/10m	4.37 Volt	13.3 Volt	0.25 Ampere
1785853465	0 Pkt/10m	0 Pkt/10m	4.17 Volt	13.3 Volt	0.25 Ampere
1785852265	0 Pkt/10m	0 Pkt/10m	4.35 Volt	13.4 Volt	0.25 Ampere
1785851064	0 Pkt/10m	0 Pkt/10m	4.31 Volt	13.3 Volt	0.25 Ampere
1785848664	0 Pkt/10m	0 Pkt/10m	4.25 Volt	13.3 Volt	0.25 Ampere
1785847463	0 Pkt/10m	0 Pkt/10m	4.17 Volt	13.4 Volt	0.25 Ampere
1785846263	0 Pkt/10m	0 Pkt/10m	4.25 Volt	13.4 Volt	0.25 Ampere
1785845062	0 Pkt/10m	0 Pkt/10m	4.27 Volt	13.4 Volt	0.25 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)