APRS Track Direct

My position About ☰

reset

CT2HBZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CT2HBZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*
1776027992	546 Count	460 Count	59 Count
1776027864	543 Count	457 Count	58 Count
1776027801	542 Count	456 Count	58 Count
1776027738	541 Count	455 Count	58 Count
1776027675	540 Count	454 Count	58 Count
1776027612	539 Count	453 Count	58 Count
1776027549	538 Count	451 Count	58 Count
1776027486	537 Count	450 Count	58 Count
1776027423	536 Count	449 Count	58 Count
1776027360	535 Count	448 Count	58 Count
1776027297	534 Count	447 Count	58 Count
1776027234	533 Count	446 Count	58 Count
1776027172	532 Count	445 Count	58 Count
1776027108	530 Count	443 Count	57 Count
1776026982	527 Count	441 Count	56 Count
1776026919	526 Count	440 Count	56 Count
1776026856	525 Count	439 Count	56 Count
1776026793	524 Count	438 Count	56 Count
1776026730	523 Count	437 Count	56 Count
1776026667	522 Count	435 Count	56 Count
1776026604	521 Count	434 Count	56 Count
1776026541	520 Count	433 Count	56 Count
1776026478	519 Count	432 Count	56 Count
1776026415	518 Count	431 Count	56 Count
1776026352	517 Count	430 Count	56 Count

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)