This is the latest recevied telemetry packets stored in our database for station/object YC0ASW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Rain* | Wind Spd* |
|---|---|---|---|---|---|
| 1776750583 | 37 | 41 | 1006 | 0 | 0 |
| 1776748583 | 37 | 43 | 1006 | 0 | 0 |
| 1776746584 | 36 | 44 | 1007 | 0 | 0 |
| 1776742583 | 36 | 43 | 1008 | 0 | 0 |
| 1776734583 | 34 | 46 | 1008 | 0 | 0 |
| 1776730583 | 35 | 46 | 1008 | 0 | 0 |
| 1776728584 | 35 | 46 | 1008 | 0 | 0 |
| 1776724583 | 35 | 45 | 1007 | 0 | 0 |
| 1776722583 | 35 | 46 | 1007 | 0 | 0 |
| 1776720584 | 35 | 46 | 1007 | 0 | 0 |
| 1776718583 | 35 | 47 | 1007 | 0 | 0 |
| 1776716583 | 35 | 46 | 1007 | 0 | 0 |
| 1776714583 | 35 | 46 | 1007 | 0 | 0 |
| 1776712583 | 36 | 46 | 1008 | 0 | 0 |
| 1776708584 | 36 | 46 | 1008 | 0 | 0 |
| 1776706584 | 36 | 46 | 1008 | 0 | 0 |
| 1776704583 | 36 | 46 | 1009 | 0 | 0 |
| 1776702584 | 36 | 46 | 1009 | 0 | 0 |
| 1776700583 | 34 | 54 | 1009 | 0 | 0 |
| 1776699027 | 33 | 55 | 1009 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Rain: 0, 1, 0
Wind Spd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)