This is the latest recevied telemetry packets stored in our database for station/object YE2YE-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1776937277 | 32 °C | 62 %RH | 1006 hPa | 0 | 0 |
| 1776936152 | 32 °C | 60 %RH | 1006 hPa | 0 | 0 |
| 1776934152 | 33 °C | 57 %RH | 1005 hPa | 0 | 0 |
| 1776932152 | 33 °C | 59 %RH | 1005 hPa | 0 | 0 |
| 1776930152 | 33 °C | 59 %RH | 1005 hPa | 0 | 0 |
| 1776929872 | 33 °C | 59 %RH | 1005 hPa | 0 | 0 |
| 1776927872 | 33 °C | 58 %RH | 1006 hPa | 0 | 0 |
| 1776927754 | 33 °C | 58 %RH | 1006 hPa | 0 | 0 |
| 1776927732 | 33 °C | 58 %RH | 1006 hPa | 0 | 0 |
| 1776927675 | 33 °C | 58 %RH | 1006 hPa | 0 | 0 |
| 1776927606 | 33 °C | 58 %RH | 1006 hPa | 0 | 0 |
| 1776926777 | 32 °C | 58 %RH | 1006 hPa | 0 | 0 |
| 1776924777 | 32 °C | 58 %RH | 1007 hPa | 0 | 0 |
| 1776922777 | 32 °C | 58 %RH | 1007 hPa | 0 | 0 |
| 1776920777 | 32 °C | 59 %RH | 1007 hPa | 0 | 0 |
| 1776918777 | 32 °C | 60 %RH | 1008 hPa | 0 | 0 |
| 1776916777 | 31 °C | 63 %RH | 1008 hPa | 0 | 0 |
| 1776914777 | 31 °C | 64 %RH | 1009 hPa | 0 | 0 |
| 1776912777 | 31 °C | 66 %RH | 1009 hPa | 0 | 0 |
| 1776912408 | 31 °C | 66 %RH | 1009 hPa | 0 | 0 |
| 1776910408 | 30 °C | 66 %RH | 1010 hPa | 0 | 0 |
| 1776908408 | 30 °C | 68 %RH | 1009 hPa | 0 | 0 |
| 1776906408 | 30 °C | 67 %RH | 1009 hPa | 0 | 0 |
| 1776904408 | 30 °C | 66 %RH | 1009 hPa | 0 | 0 |
| 1776902408 | 29 °C | 66 %RH | 1009 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)