This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765040102 | 1391 | 68.9 | 36.5 | 61.7 | 0 |
| 1765039201 | 1392 | 67.2 | 35.4 | 60.2 | 0 |
| 1765038301 | 1391 | 65.5 | 34.3 | 58.2 | 0 |
| 1765037401 | 1391 | 63.5 | 33.2 | 57.4 | 0 |
| 1765035601 | 1391 | 57.2 | 30 | 50.4 | 0 |
| 1765034701 | 1392 | 55.4 | 28.9 | 46 | 0 |
| 1765033801 | 1391 | 55.6 | 28.4 | 45.4 | 0 |
| 1765032902 | 1392 | 57.6 | 30 | 46.3 | 0 |
| 1765032001 | 1391 | 59.3 | 30.6 | 50.6 | 0 |
| 1765031101 | 1391 | 59.1 | 30 | 50.7 | 0 |
| 1765030201 | 1392 | 58.6 | 30 | 50 | 0 |
| 1765029302 | 1393 | 58.3 | 30 | 49.6 | 0 |
| 1765028401 | 1391 | 58.2 | 30 | 49.2 | 0 |
| 1765027501 | 1391 | 58.7 | 30.6 | 49.6 | 0 |
| 1765026601 | 1391 | 59.1 | 30 | 50.2 | 0 |
| 1765025703 | 1392 | 59 | 30.6 | 50.2 | 0 |
| 1765024802 | 1391 | 58.7 | 30 | 50 | 0 |
| 1765023901 | 1391 | 58.4 | 30 | 49.6 | 0 |
| 1765023002 | 1392 | 58.4 | 30 | 49.7 | 0 |
| 1765022103 | 1392 | 58.2 | 30 | 49.6 | 0 |
| 1765021202 | 1392 | 58 | 30 | 49.3 | 0 |
| 1765020302 | 1392 | 57.6 | 30 | 48.9 | 0 |
| 1765019402 | 1391 | 57.8 | 30.6 | 48.5 | 0 |
| 1765018503 | 1392 | 57.9 | 30 | 49 | 0 |
| 1765017602 | 1391 | 58.2 | 30 | 49.1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)