This is the latest recevied telemetry packets stored in our database for station/object ON0DV-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791149622 | 0 Count | 217 Count | 0 Count | 0 VDC | 0 VDC |
| 1791146922 | 0 Count | 216 Count | 0 Count | 0 VDC | 0 VDC |
| 1791144222 | 0 Count | 216 Count | 0 Count | 0 VDC | 0 VDC |
| 1791141526 | 0 Count | 212 Count | 0 Count | 0 VDC | 0 VDC |
| 1791138820 | 0 Count | 208 Count | 0 Count | 0 VDC | 0 VDC |
| 1791136120 | 0 Count | 204 Count | 0 Count | 0 VDC | 0 VDC |
| 1791133420 | 0 Count | 200 Count | 0 Count | 0 VDC | 0 VDC |
| 1791130720 | 0 Count | 196 Count | 0 Count | 0 VDC | 0 VDC |
| 1791125320 | 0 Count | 191 Count | 0 Count | 0 VDC | 0 VDC |
| 1791122620 | 0 Count | 190 Count | 0 Count | 0 VDC | 0 VDC |
| 1791119928 | 0 Count | 187 Count | 0 Count | 0 VDC | 0 VDC |
| 1791117234 | 0 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1791114534 | 0 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1791111834 | 0 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1791109134 | 0 Count | 183 Count | 0 Count | 0 VDC | 0 VDC |
| 1791106434 | 0 Count | 182 Count | 0 Count | 0 VDC | 0 VDC |
| 1791103731 | 0 Count | 168 Count | 0 Count | 0 VDC | 0 VDC |
| 1791101031 | 0 Count | 168 Count | 0 Count | 0 VDC | 0 VDC |
| 1791098356 | 0 Count | 167 Count | 0 Count | 0 VDC | 0 VDC |
| 1791095621 | 0 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1791092921 | 0 Count | 156 Count | 0 Count | 0 VDC | 0 VDC |
| 1791090221 | 0 Count | 154 Count | 0 Count | 0 VDC | 0 VDC |
| 1791087520 | 0 Count | 152 Count | 0 Count | 0 VDC | 0 VDC |
| 1791084820 | 0 Count | 151 Count | 0 Count | 0 VDC | 0 VDC |
| 1791082121 | 0 Count | 149 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)