This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791112545 | 305 Count | 547 Count | 286 Count | 4.15 VDC | 0.14 VDC |
| 1791110742 | 290 Count | 523 Count | 272 Count | 4.16 VDC | 0.14 VDC |
| 1791108939 | 280 Count | 507 Count | 263 Count | 4.15 VDC | 0.14 VDC |
| 1791107136 | 266 Count | 482 Count | 250 Count | 4.15 VDC | 0.14 VDC |
| 1791105369 | 257 Count | 466 Count | 242 Count | 4.15 VDC | 0.14 VDC |
| 1791103566 | 237 Count | 439 Count | 223 Count | 4.16 VDC | 0.14 VDC |
| 1791101763 | 225 Count | 420 Count | 212 Count | 4.15 VDC | 0.14 VDC |
| 1791099960 | 209 Count | 398 Count | 197 Count | 4.15 VDC | 0.14 VDC |
| 1791098157 | 191 Count | 370 Count | 180 Count | 4.15 VDC | 0.14 VDC |
| 1791096354 | 166 Count | 333 Count | 156 Count | 4.16 VDC | 0.14 VDC |
| 1791094551 | 150 Count | 310 Count | 141 Count | 4.15 VDC | 0.14 VDC |
| 1791092748 | 134 Count | 283 Count | 126 Count | 4.15 VDC | 0.14 VDC |
| 1791090945 | 123 Count | 257 Count | 116 Count | 4.16 VDC | 0.14 VDC |
| 1791089142 | 104 Count | 221 Count | 98 Count | 4.15 VDC | 0.14 VDC |
| 1791087339 | 84 Count | 183 Count | 79 Count | 4.15 VDC | 0.14 VDC |
| 1791085536 | 68 Count | 150 Count | 64 Count | 4.15 VDC | 0.14 VDC |
| 1791083769 | 54 Count | 117 Count | 51 Count | 4.15 VDC | 0.14 VDC |
| 1791081966 | 39 Count | 92 Count | 37 Count | 4.15 VDC | 0.14 VDC |
| 1791080163 | 26 Count | 62 Count | 25 Count | 4.15 VDC | 0.14 VDC |
| 1791078360 | 11 Count | 30 Count | 11 Count | 4.15 VDC | 0.14 VDC |
| 1791076557 | 416 Count | 1026 Count | 387 Count | 4.15 VDC | 0.14 VDC |
| 1791074754 | 402 Count | 998 Count | 374 Count | 4.15 VDC | 0.14 VDC |
| 1791072950 | 389 Count | 969 Count | 362 Count | 4.15 VDC | 0.14 VDC |
| 1791071147 | 375 Count | 939 Count | 349 Count | 4.18 VDC | 0.14 VDC |
| 1791069344 | 362 Count | 903 Count | 337 Count | 4.14 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)