This is the latest recevied telemetry packets stored in our database for station/object SR3DPX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780606736 | 143 | 207 | 79 | 0 | 0 |
| 1780605834 | 133 | 189 | 73 | 0 | 0 |
| 1780604934 | 114 | 158 | 63 | 0 | 0 |
| 1780604030 | 97 | 126 | 54 | 0 | 0 |
| 1780603129 | 76 | 96 | 42 | 0 | 0 |
| 1780602228 | 59 | 69 | 32 | 0 | 0 |
| 1780601327 | 25 | 33 | 14 | 0 | 0 |
| 1780600426 | 642 | 1005 | 347 | 0 | 0 |
| 1780599526 | 626 | 976 | 338 | 0 | 0 |
| 1780598624 | 604 | 935 | 327 | 0 | 0 |
| 1780597723 | 591 | 878 | 318 | 0 | 0 |
| 1780596822 | 580 | 853 | 312 | 0 | 0 |
| 1780595921 | 569 | 832 | 305 | 0 | 0 |
| 1780595020 | 554 | 811 | 297 | 0 | 0 |
| 1780594119 | 541 | 786 | 289 | 0 | 0 |
| 1780593218 | 527 | 762 | 282 | 0 | 0 |
| 1780592317 | 486 | 718 | 261 | 0 | 0 |
| 1780591427 | 464 | 685 | 249 | 0 | 0 |
| 1780585575 | 462 | 685 | 249 | 0 | 0 |
| 1780584674 | 449 | 661 | 241 | 0 | 0 |
| 1780583772 | 431 | 636 | 231 | 0 | 0 |
| 1780582871 | 411 | 605 | 220 | 0 | 0 |
| 1780581970 | 392 | 575 | 209 | 0 | 0 |
| 1780581069 | 381 | 553 | 203 | 0 | 0 |
| 1780580168 | 361 | 527 | 192 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)