This is the latest recevied telemetry packets stored in our database for station/object W7SAR-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791150488 | 11.98 Volts | 123.77 Deg.F | 0 | 0 | 0 |
| 1791149885 | 11.98 Volts | 121.13 Deg.F | 0 | 0 | 0 |
| 1791149282 | 11.98 Volts | 120.25 Deg.F | 0 | 0 | 0 |
| 1791148680 | 11.98 Volts | 118.49 Deg.F | 0 | 0 | 0 |
| 1791148077 | 11.98 Volts | 118.49 Deg.F | 0 | 0 | 0 |
| 1791147475 | 12.01 Volts | 117.61 Deg.F | 0 | 0 | 0 |
| 1791146872 | 12.01 Volts | 117.61 Deg.F | 0 | 0 | 0 |
| 1791146270 | 11.98 Volts | 118.49 Deg.F | 0 | 0 | 0 |
| 1791145668 | 12.01 Volts | 119.37 Deg.F | 0 | 0 | 0 |
| 1791145067 | 12.01 Volts | 120.25 Deg.F | 0 | 0 | 0 |
| 1791144462 | 12.01 Volts | 122.01 Deg.F | 0 | 0 | 0 |
| 1791143859 | 12.01 Volts | 124.65 Deg.F | 0 | 0 | 0 |
| 1791143256 | 12.04 Volts | 127.29 Deg.F | 0 | 0 | 0 |
| 1791142653 | 12.01 Volts | 129.05 Deg.F | 0 | 0 | 0 |
| 1791142049 | 12.01 Volts | 130.81 Deg.F | 0 | 0 | 0 |
| 1791141446 | 12.01 Volts | 132.57 Deg.F | 0 | 0 | 0 |
| 1791140842 | 12.04 Volts | 130.81 Deg.F | 0 | 0 | 0 |
| 1791140238 | 12.04 Volts | 129.93 Deg.F | 0 | 0 | 0 |
| 1791139635 | 12.04 Volts | 129.05 Deg.F | 0 | 0 | 0 |
| 1791139031 | 12.04 Volts | 127.29 Deg.F | 0 | 0 | 0 |
| 1791138426 | 12.01 Volts | 125.53 Deg.F | 0 | 0 | 0 |
| 1791137822 | 12.04 Volts | 124.65 Deg.F | 0 | 0 | 0 |
| 1791137219 | 12.04 Volts | 123.77 Deg.F | 0 | 0 | 0 |
| 1791136616 | 12.01 Volts | 122.01 Deg.F | 0 | 0 | 0 |
| 1791136014 | 12.01 Volts | 118.49 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)