This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791118084 | 440 Count | 568 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791116883 | 439 Count | 565 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791115682 | 438 Count | 564 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791114481 | 437 Count | 563 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791113281 | 436 Count | 562 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791112080 | 435 Count | 561 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791110879 | 434 Count | 560 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791109678 | 433 Count | 559 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1791108477 | 432 Count | 558 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1791106076 | 430 Count | 556 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791104875 | 429 Count | 555 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1791103675 | 428 Count | 554 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791102474 | 427 Count | 553 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791101273 | 426 Count | 552 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1791100072 | 425 Count | 546 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791098884 | 424 Count | 545 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791096483 | 422 Count | 543 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1791095282 | 421 Count | 542 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791094081 | 420 Count | 541 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791092881 | 419 Count | 540 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791091680 | 418 Count | 539 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791090479 | 417 Count | 538 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1791089278 | 416 Count | 537 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791088078 | 415 Count | 536 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791086877 | 414 Count | 535 Count | 0 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)