APRS Track Direct

My position About ☰

reset

IU5RCJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU5RCJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*
1780658444	828 Count	301 Count	151 Count
1780657540	815 Count	299 Count	150 Count
1780656637	798 Count	296 Count	149 Count
1780655733	784 Count	294 Count	148 Count
1780654830	768 Count	292 Count	147 Count
1780653926	754 Count	291 Count	146 Count
1780653023	737 Count	290 Count	145 Count
1780652119	722 Count	283 Count	144 Count
1780651216	704 Count	281 Count	143 Count
1780650313	691 Count	278 Count	143 Count
1780649409	671 Count	266 Count	141 Count
1780648505	628 Count	234 Count	110 Count
1780647598	605 Count	213 Count	103 Count
1780646695	592 Count	210 Count	102 Count
1780645878	577 Count	197 Count	102 Count
1780644974	563 Count	186 Count	101 Count
1780644070	547 Count	176 Count	100 Count
1780643167	534 Count	174 Count	99 Count
1780642263	514 Count	169 Count	97 Count
1780641359	499 Count	167 Count	96 Count
1780640456	478 Count	165 Count	94 Count
1780639552	464 Count	161 Count	92 Count
1780638648	447 Count	159 Count	91 Count
1780637745	434 Count	158 Count	90 Count
1780636841	417 Count	156 Count	89 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)