This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777321462 | 0 Count | 949 Count | 0 Count | 0 VDC | 0 VDC |
| 1777318821 | 0 Count | 857 Count | 0 Count | 0 VDC | 0 VDC |
| 1777316181 | 0 Count | 761 Count | 0 Count | 0 VDC | 0 VDC |
| 1777313541 | 0 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1777310901 | 0 Count | 503 Count | 0 Count | 0 VDC | 0 VDC |
| 1777308261 | 0 Count | 370 Count | 0 Count | 0 VDC | 0 VDC |
| 1777305621 | 0 Count | 255 Count | 0 Count | 0 VDC | 0 VDC |
| 1777305142 | 0 Count | 230 Count | 0 Count | 0 VDC | 0 VDC |
| 1777302502 | 0 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
| 1777299862 | 0 Count | 1107 Count | 0 Count | 0 VDC | 0 VDC |
| 1777297222 | 0 Count | 994 Count | 0 Count | 0 VDC | 0 VDC |
| 1777294582 | 0 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1777291941 | 0 Count | 748 Count | 0 Count | 0 VDC | 0 VDC |
| 1777283540 | 0 Count | 402 Count | 0 Count | 0 VDC | 0 VDC |
| 1777280902 | 0 Count | 291 Count | 0 Count | 0 VDC | 0 VDC |
| 1777278260 | 0 Count | 75 Count | 0 Count | 0 VDC | 0 VDC |
| 1777275620 | 0 Count | 1092 Count | 0 Count | 0 VDC | 0 VDC |
| 1777272980 | 0 Count | 974 Count | 0 Count | 0 VDC | 0 VDC |
| 1777270340 | 0 Count | 870 Count | 0 Count | 0 VDC | 0 VDC |
| 1777267700 | 0 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1777265059 | 0 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1777262419 | 0 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)