This is the latest recevied telemetry packets stored in our database for station/object KC0OOO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1791049563 | 492 | 11.5 F | 0 V | 0 M | 0 |
| 1791049543 | 493 | 11.5 F | 0 V | 0 M | 0 |
| 1791049536 | 492 | 11.5 F | 0 V | 0 M | 0 |
| 1791049487 | 496 | 11.5 F | 0 V | 0 M | 0 |
| 1791049482 | 491 | 11.5 F | 0 V | 0 M | 0 |
| 1791049448 | 499 | 11.5 F | 0 V | 0 M | 0 |
| 1791049442 | 497 | 11.5 F | 0 V | 0 M | 0 |
| 1791049437 | 498 | 11.4 F | 0 V | 0 M | 0 |
| 1791049127 | 490 | 10.9 F | 0 V | 0 M | 0 |
| 1791049109 | 489 | 10.9 F | 0 V | 0 M | 0 |
| 1791048876 | 491 | 10.8 F | 0 V | 0 M | 0 |
| 1791048838 | 493 | 10.7 F | 0 V | 0 M | 0 |
| 1791048833 | 493 | 10.7 F | 0 V | 0 M | 0 |
| 1791045822 | 500 | 9.2 F | 0 V | 0 M | 0 |
| 1791045817 | 497 | 9 F | 0 V | 0 M | 0 |
| 1791045812 | 500 | 9 F | 0 V | 0 M | 0 |
| 1791045774 | 500 | 8.9 F | 0 V | 0 M | 0 |
| 1791045767 | 500 | 9 F | 0 V | 0 M | 0 |
| 1791045752 | 501 | 8.9 F | 0 V | 0 M | 0 |
| 1791045707 | 499 | 8.8 F | 0 V | 0 M | 0 |
| 1791045639 | 497 | 8.7 F | 0 V | 0 M | 0 |
| 1791045594 | 504 | 8.8 F | 0 V | 0 M | 0 |
| 1791045522 | 500 | 8.4 F | 0 V | 0 M | 0 |
| 1791045517 | 497 | 8.4 F | 0 V | 0 M | 0 |
| 1791045499 | 498 | 8.4 F | 0 V | 0 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)