This is the latest recevied telemetry packets stored in our database for station/object DH1NSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780606836 | 0 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1780605036 | 0 Count | 821 Count | 0 Count | 0 VDC | 0 VDC |
| 1780603238 | 0 Count | 820 Count | 0 Count | 0 VDC | 0 VDC |
| 1780601438 | 0 Count | 819 Count | 0 Count | 0 VDC | 0 VDC |
| 1780599638 | 0 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
| 1780597838 | 0 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1780596038 | 0 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1780594238 | 0 Count | 812 Count | 0 Count | 0 VDC | 0 VDC |
| 1780592438 | 0 Count | 811 Count | 0 Count | 0 VDC | 0 VDC |
| 1780590638 | 0 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1780588838 | 0 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1780587038 | 0 Count | 806 Count | 0 Count | 0 VDC | 0 VDC |
| 1780585238 | 0 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1780583438 | 0 Count | 804 Count | 0 Count | 0 VDC | 0 VDC |
| 1780581653 | 0 Count | 803 Count | 0 Count | 0 VDC | 0 VDC |
| 1780579853 | 0 Count | 802 Count | 0 Count | 0 VDC | 0 VDC |
| 1780578052 | 0 Count | 801 Count | 0 Count | 0 VDC | 0 VDC |
| 1780576252 | 0 Count | 797 Count | 0 Count | 0 VDC | 0 VDC |
| 1780574452 | 0 Count | 796 Count | 0 Count | 0 VDC | 0 VDC |
| 1780572652 | 0 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1780570852 | 0 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1780569052 | 0 Count | 793 Count | 0 Count | 0 VDC | 0 VDC |
| 1780567252 | 0 Count | 792 Count | 0 Count | 0 VDC | 0 VDC |
| 1780565452 | 0 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1780563652 | 0 Count | 790 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)