APRS Track Direct

My position About ☰

reset

HS5AU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	VBAT*	IBAT*	SOLAR*	SUN*	TEMP*
1791123903	13.14 V	43 mA	7.43 V	2 W/m²	23.57 °C
1791123303	13.15 V	42 mA	7.43 V	2 W/m²	23.39 °C
1791122703	13.15 V	44 mA	7.43 V	2 W/m²	23.48 °C
1791122103	13.14 V	63 mA	7.42 V	2 W/m²	22.74 °C
1791121503	13.14 V	86 mA	7.43 V	2 W/m²	22.82 °C
1791120903	13.14 V	60 mA	7.43 V	2 W/m²	22.39 °C
1791120303	13.14 V	63 mA	7.43 V	2 W/m²	22.41 °C
1791119703	13.15 V	48 mA	7.43 V	2 W/m²	22.56 °C
1791119256	13.14 V	60 mA	7.43 V	2 W/m²	22.1 °C
1791118656	13.15 V	47 mA	7.43 V	2 W/m²	21.47 °C
1791118056	13.15 V	59 mA	7.43 V	2 W/m²	21.59 °C
1791117456	13.14 V	62 mA	7.43 V	2 W/m²	22.01 °C
1791116856	13.15 V	59 mA	7.43 V	2 W/m²	22.85 °C
1791116256	13.15 V	49 mA	7.44 V	2 W/m²	23.45 °C
1791115656	13.15 V	58 mA	7.44 V	2 W/m²	24.1 °C
1791115056	13.15 V	47 mA	7.44 V	2 W/m²	23.78 °C
1791114456	13.15 V	55 mA	7.44 V	2 W/m²	23.64 °C
1791113856	13.15 V	69 mA	7.44 V	2 W/m²	23.06 °C
1791113256	13.16 V	62 mA	7.44 V	2 W/m²	23.44 °C
1791112656	13.15 V	64 mA	7.45 V	2 W/m²	23.27 °C
1791112056	13.16 V	59 mA	10.69 V	2 W/m²	23.01 °C
1791111456	13.17 V	46 mA	13.97 V	12 W/m²	22.53 °C
1791110856	13.19 V	51 mA	15.12 V	29 W/m²	22.96 °C
1791110256	13.21 V	70 mA	15.82 V	49 W/m²	23.3 °C
1791109656	13.24 V	71 mA	16.55 V	75 W/m²	22.68 °C

*Used Equation Coefficients:

VBAT: 0, 0.01, 0

IBAT: 0, 1, -2000

SOLAR: 0, 0.01, 0

SUN: 0, 1, 0

TEMP: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)