APRS Track Direct

My position About ☰

reset

HS2AC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1780654176	33.37 °C	62.6 %RH	800 hPa	4.08 V
1780653140	33.21 °C	61.9 %RH	800 hPa	4.08 V
1780652103	33.42 °C	60.8 %RH	800 hPa	4.1 V
1780651066	33.54 °C	58.1 %RH	800 hPa	4.1 V
1780650030	33.7 °C	57.9 %RH	800 hPa	4.1 V
1780648993	34.5 °C	57.3 %RH	800 hPa	4.12 V
1780647956	34.55 °C	57.2 %RH	800 hPa	4.12 V
1780646920	34.69 °C	57.4 %RH	800 hPa	4.1 V
1780645883	34.66 °C	56.8 %RH	800 hPa	4.1 V
1780644846	35.06 °C	56.9 %RH	800 hPa	4.08 V
1780643809	34.3 °C	58.1 %RH	800 hPa	4.07 V
1780642772	34.99 °C	53.1 %RH	800 hPa	4.06 V
1780641735	34.83 °C	54.8 %RH	800 hPa	4.04 V
1780640698	36.14 °C	50.9 %RH	800 hPa	4.04 V
1780639661	34.7 °C	56.4 %RH	800 hPa	4.03 V
1780638624	35.04 °C	55 %RH	800 hPa	4.02 V
1780637586	35.16 °C	54 %RH	800 hPa	4.01 V
1780636548	35.34 °C	51.2 %RH	800 hPa	4 V
1780635507	35.46 °C	52.5 %RH	800 hPa	3.98 V
1780634470	34.77 °C	56.6 %RH	800 hPa	3.99 V
1780633434	36.29 °C	51.5 %RH	800 hPa	3.98 V
1780632397	33.92 °C	55.2 %RH	800 hPa	3.98 V
1780631358	34.52 °C	54.9 %RH	800 hPa	3.96 V
1780630321	33.68 °C	57.8 %RH	800 hPa	3.94 V
1780629279	34.01 °C	59 %RH	800 hPa	3.94 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)