This is the latest recevied telemetry packets stored in our database for station/object KE7A-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791485588 | 13.62 V | 94.73 Deg.F | 0 | 0 | 0 |
| 1791485515 | 13.98 V | 96.49 Deg.F | 0 | 0 | 0 |
| 1791485390 | 13.77 V | 95.61 Deg.F | 0 | 0 | 0 |
| 1791485360 | 14.01 V | 95.61 Deg.F | 0 | 0 | 0 |
| 1791485275 | 13.71 V | 95.61 Deg.F | 0 | 0 | 0 |
| 1791485176 | 13.68 V | 94.73 Deg.F | 0 | 0 | 0 |
| 1791485102 | 13.36 V | 93.85 Deg.F | 0 | 0 | 0 |
| 1791485084 | 13.45 V | 92.97 Deg.F | 0 | 0 | 0 |
| 1791485076 | 13.3 V | 92.09 Deg.F | 0 | 0 | 0 |
| 1791485062 | 13.83 V | 92.09 Deg.F | 0 | 0 | 0 |
| 1791484612 | 13.27 V | 96.49 Deg.F | 0 | 0 | 0 |
| 1791484588 | 13.3 V | 94.73 Deg.F | 0 | 0 | 0 |
| 1791484555 | 13.33 V | 94.73 Deg.F | 0 | 0 | 0 |
| 1791484534 | 13.62 V | 93.85 Deg.F | 0 | 0 | 0 |
| 1791484500 | 13.45 V | 94.73 Deg.F | 0 | 0 | 0 |
| 1791484494 | 13.65 V | 92.97 Deg.F | 0 | 0 | 0 |
| 1791484478 | 13.36 V | 92.09 Deg.F | 0 | 0 | 0 |
| 1791484433 | 13.83 V | 91.21 Deg.F | 0 | 0 | 0 |
| 1791484282 | 13.6 V | 90.33 Deg.F | 0 | 0 | 0 |
| 1791484241 | 13.77 V | 88.57 Deg.F | 0 | 0 | 0 |
| 1791484234 | 13.57 V | 88.57 Deg.F | 0 | 0 | 0 |
| 1791484229 | 13.33 V | 87.69 Deg.F | 0 | 0 | 0 |
| 1791484195 | 12.25 V | 85.93 Deg.F | 0 | 0 | 0 |
| 1791482305 | 13.3 V | 78.89 Deg.F | 0 | 0 | 0 |
| 1791482263 | 13.54 V | 78.89 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Batt: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)