This is the latest recevied telemetry packets stored in our database for station/object G4DBI-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780602414 | 7.71 VDC | 0 | 0 | 0 | 0 |
| 1780602375 | 7.77 VDC | 0 | 0 | 0 | 0 |
| 1780602102 | 7.72 VDC | 0 | 0 | 0 | 0 |
| 1780602091 | 7.77 VDC | 0 | 0 | 0 | 0 |
| 1780601874 | 7.74 VDC | 0 | 0 | 0 | 0 |
| 1780601738 | 7.79 VDC | 0 | 0 | 0 | 0 |
| 1780600693 | 7.8 VDC | 0 | 0 | 0 | 0 |
| 1780600663 | 7.8 VDC | 0 | 0 | 0 | 0 |
| 1780599936 | 7.82 VDC | 0 | 0 | 0 | 0 |
| 1780599032 | 7.84 VDC | 0 | 0 | 0 | 0 |
| 1780598129 | 7.85 VDC | 0 | 0 | 0 | 0 |
| 1780597225 | 7.86 VDC | 0 | 0 | 0 | 0 |
| 1780596322 | 7.88 VDC | 0 | 0 | 0 | 0 |
| 1780595418 | 7.89 VDC | 0 | 0 | 0 | 0 |
| 1780594515 | 7.9 VDC | 0 | 0 | 0 | 0 |
| 1780593611 | 7.92 VDC | 0 | 0 | 0 | 0 |
| 1780592689 | 7.88 VDC | 0 | 0 | 0 | 0 |
| 1780591956 | 7.92 VDC | 0 | 0 | 0 | 0 |
| 1780584843 | 7.94 VDC | 0 | 0 | 0 | 0 |
| 1780583940 | 7.95 VDC | 0 | 0 | 0 | 0 |
| 1780583036 | 7.96 VDC | 0 | 0 | 0 | 0 |
| 1780582133 | 7.96 VDC | 0 | 0 | 0 | 0 |
| 1780581229 | 7.97 VDC | 0 | 0 | 0 | 0 |
| 1780580326 | 7.98 VDC | 0 | 0 | 0 | 0 |
| 1780579422 | 7.98 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)