This is the latest recevied telemetry packets stored in our database for station/object G5NWH-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1780834305 | 4.06 VDC | 21.9 C | 57.22 % | 1021.63 hPa | 0 |
| 1780829415 | 4.07 VDC | 19.4 C | 60.13 % | 1019.88 hPa | 0 |
| 1780828303 | 4.07 VDC | 19.2 C | 60.7 % | 1026.75 hPa | 0 |
| 1780827977 | 4.07 VDC | 19.4 C | 61.46 % | 1026.88 hPa | 0 |
| 1780827536 | 4.07 VDC | 19.3 C | 61.57 % | 1022.13 hPa | 0 |
| 1780826896 | 4.07 VDC | 18.8 C | 61.1 % | 1024.25 hPa | 0 |
| 1780826533 | 4.07 VDC | 18.9 C | 60.41 % | 1025.25 hPa | 0 |
| 1780826077 | 4.07 VDC | 19.2 C | 60.95 % | 1027.25 hPa | 0 |
| 1780825568 | 4.07 VDC | 19.4 C | 62.05 % | 1022.75 hPa | 0 |
| 1780824344 | 4.08 VDC | 18.8 C | 62.08 % | 1026.63 hPa | 0 |
| 1780823114 | 4.08 VDC | 18.6 C | 61.03 % | 1024.13 hPa | 0 |
| 1780822698 | 4.08 VDC | 18.6 C | 60.85 % | 1025.38 hPa | 0 |
| 1780822251 | 4.09 VDC | 18.8 C | 60.67 % | 1023.13 hPa | 0 |
| 1780821821 | 4.09 VDC | 19.1 C | 59.98 % | 1024 hPa | 0 |
| 1780821156 | 4.09 VDC | 20.2 C | 61.1 % | 1024.13 hPa | 0 |
| 1780813400 | 417 VDC | 674 C | 5956 % | 8218 hPa | 0 |
| 1780803167 | 417 VDC | 700 C | 4893 % | 8159 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)