This is the latest recevied telemetry packets stored in our database for station/object SV3SMG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791143494 | 811 Count | 308 Count | 146 Count | 4.06 VDC | 0 VDC |
| 1791141689 | 809 Count | 308 Count | 146 Count | 4.06 VDC | 0 VDC |
| 1791139885 | 804 Count | 305 Count | 143 Count | 4.06 VDC | 0 VDC |
| 1791138081 | 800 Count | 303 Count | 141 Count | 4.04 VDC | 0 VDC |
| 1791136277 | 795 Count | 301 Count | 139 Count | 4.06 VDC | 0 VDC |
| 1791134473 | 790 Count | 299 Count | 137 Count | 4.05 VDC | 0 VDC |
| 1791132668 | 786 Count | 297 Count | 135 Count | 4.06 VDC | 0 VDC |
| 1791130864 | 782 Count | 295 Count | 133 Count | 4.05 VDC | 0 VDC |
| 1791129110 | 774 Count | 264 Count | 127 Count | 4.05 VDC | 0 VDC |
| 1791127306 | 771 Count | 180 Count | 126 Count | 4.06 VDC | 0 VDC |
| 1791125502 | 768 Count | 180 Count | 126 Count | 4.06 VDC | 0 VDC |
| 1791123698 | 764 Count | 180 Count | 126 Count | 4.05 VDC | 0 VDC |
| 1791121893 | 762 Count | 180 Count | 126 Count | 4.07 VDC | 0 VDC |
| 1791120089 | 760 Count | 180 Count | 126 Count | 4.04 VDC | 0 VDC |
| 1791118285 | 758 Count | 180 Count | 126 Count | 4.06 VDC | 0 VDC |
| 1791116481 | 756 Count | 128 Count | 126 Count | 4.07 VDC | 0 VDC |
| 1791114676 | 748 Count | 121 Count | 121 Count | 4.07 VDC | 0 VDC |
| 1791112872 | 738 Count | 114 Count | 114 Count | 4.04 VDC | 0 VDC |
| 1791111068 | 732 Count | 111 Count | 111 Count | 4.05 VDC | 0 VDC |
| 1791109264 | 730 Count | 111 Count | 111 Count | 4.06 VDC | 0 VDC |
| 1791105706 | 726 Count | 111 Count | 111 Count | 4.07 VDC | 0 VDC |
| 1791103902 | 721 Count | 111 Count | 111 Count | 4.07 VDC | 0 VDC |
| 1791102098 | 718 Count | 111 Count | 111 Count | 4.04 VDC | 0 VDC |
| 1791089468 | 710 Count | 111 Count | 111 Count | 4.05 VDC | 0 VDC |
| 1791087664 | 709 Count | 111 Count | 111 Count | 4.05 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)