APRS Track Direct

My position About ☰

reset

HS8AS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS8AS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	VBAT *	CPU*
1791076118	26.68 °C	89.4 %RH	3.97 V	37.29 °C
1791075518	26.47 °C	90 %RH	3.97 V	35.29 °C
1791074918	25.94 °C	91 %RH	3.95 V	34.29 °C
1791074318	26.07 °C	88.6 %RH	3.95 V	35.29 °C
1791073718	25.5 °C	92.4 %RH	3.93 V	33.29 °C
1791073118	25.36 °C	92.6 %RH	3.93 V	32.29 °C
1791072518	25.5 °C	91.7 %RH	3.92 V	32.29 °C
1791071918	25.15 °C	94.8 %RH	3.91 V	31.29 °C
1791071318	25.16 °C	94.1 %RH	3.91 V	31.29 °C
1791070718	25.25 °C	92.1 %RH	3.9 V	31.29 °C
1791070118	25.05 °C	93.3 %RH	3.89 V	30.29 °C
1791068918	24.37 °C	98.9 %RH	3.89 V	30.29 °C
1791068318	24.38 °C	98.5 %RH	3.89 V	29.29 °C
1791067718	24.24 °C	99.3 %RH	3.89 V	30.29 °C
1791067118	24.16 °C	99.8 %RH	3.89 V	30.29 °C
1791066518	24.26 °C	99 %RH	3.89 V	31.29 °C
1791065918	24.71 °C	97.5 %RH	3.89 V	31.29 °C
1791065318	25.36 °C	92 %RH	3.9 V	31.29 °C
1791064718	25.56 °C	90.6 %RH	3.89 V	31.29 °C
1791064118	25.7 °C	89.8 %RH	3.9 V	31.29 °C
1791063518	25.73 °C	89.6 %RH	3.9 V	31.29 °C
1791062918	25.61 °C	90.2 %RH	3.9 V	31.29 °C
1791062318	25.62 °C	89.8 %RH	3.9 V	31.29 °C
1791061718	25.23 °C	92.4 %RH	3.91 V	30.29 °C
1791061118	25.13 °C	93.5 %RH	3.9 V	30.29 °C

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

VBAT : 0, 0.01, 0

CPU: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)