This is the latest recevied telemetry packets stored in our database for station/object 9W8NIC-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782221829 | 4.15 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782220928 | 4.15 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782220028 | 4.15 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782219128 | 4.15 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782218228 | 4.16 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782217327 | 4.16 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782216427 | 4.17 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782215527 | 4.17 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782214626 | 4.18 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782213726 | 4.18 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782212826 | 4.19 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782211926 | 4.2 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1782211025 | 4.21 VDC | 3.78 VDC | 0 | 0 | 0 |
| 1782210125 | 4.23 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1782209225 | 4.24 VDC | 4.04 VDC | 0 | 0 | 0 |
| 1782208324 | 4.26 VDC | 4.1 VDC | 0 | 0 | 0 |
| 1782207424 | 4.26 VDC | 4.14 VDC | 0 | 0 | 0 |
| 1782206524 | 4.27 VDC | 4.14 VDC | 0 | 0 | 0 |
| 1782205624 | 4.28 VDC | 6.32 VDC | 0 | 0 | 0 |
| 1782204723 | 4.28 VDC | 6.72 VDC | 0 | 0 | 0 |
| 1782203823 | 4.28 VDC | 6.86 VDC | 0 | 0 | 0 |
| 1782202923 | 4.28 VDC | 6.82 VDC | 0 | 0 | 0 |
| 1782202022 | 4.28 VDC | 7 VDC | 0 | 0 | 0 |
| 1782201122 | 4.27 VDC | 6.82 VDC | 0 | 0 | 0 |
| 1782200222 | 4.28 VDC | 6.9 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)