APRS Track Direct

My position About ☰

reset

SP8AA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8AA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*
1785830992	277 Count	476 Count	254 Count
1785829177	243 Count	438 Count	222 Count
1785828272	231 Count	420 Count	211 Count
1785827366	218 Count	398 Count	199 Count
1785826463	208 Count	376 Count	190 Count
1785825559	190 Count	351 Count	173 Count
1785824656	179 Count	334 Count	163 Count
1785823754	162 Count	309 Count	147 Count
1785822849	150 Count	291 Count	136 Count
1785821942	137 Count	267 Count	124 Count
1785821038	126 Count	248 Count	114 Count
1785820137	111 Count	222 Count	100 Count
1785819231	100 Count	192 Count	90 Count
1785818329	85 Count	160 Count	76 Count
1785817420	71 Count	131 Count	63 Count
1785816642	51 Count	105 Count	48 Count
1785815734	38 Count	77 Count	36 Count
1785814827	21 Count	52 Count	20 Count
1785813921	10 Count	31 Count	10 Count
1785813014	516 Count	1004 Count	477 Count
1785812106	502 Count	972 Count	464 Count
1785811202	491 Count	946 Count	454 Count
1785810299	481 Count	916 Count	445 Count
1785809394	463 Count	890 Count	428 Count
1785808491	452 Count	873 Count	418 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)