This is the latest recevied telemetry packets stored in our database for station/object YC1SNI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Voltage* | Current* | Value5* |
|---|---|---|---|---|---|
| 1791136163 | 29 °C | 67 %RH | 4 V | 106 mA | 0 |
| 1791134408 | 29 °C | 65 %RH | 4 V | 107 mA | 0 |
| 1791132653 | 29 °C | 61 %RH | 4 V | 120 mA | 0 |
| 1791130898 | 28 °C | 56 %RH | 4 V | 0 mA | 0 |
| 1791129143 | 26 °C | 55 %RH | 4 V | 0 mA | 0 |
| 1791127388 | 26 °C | 55 %RH | 4 V | 0 mA | 0 |
| 1791125633 | 27 °C | 56 %RH | 4 V | 0 mA | 0 |
| 1791123878 | 27 °C | 57 %RH | 4 V | 0 mA | 0 |
| 1791122123 | 27 °C | 57 %RH | 4 V | 0 mA | 0 |
| 1791120352 | 27 °C | 58 %RH | 4 V | 0 mA | 0 |
| 1791118597 | 27 °C | 59 %RH | 4 V | 0 mA | 0 |
| 1791116842 | 28 °C | 61 %RH | 4 V | 0 mA | 0 |
| 1791115126 | 29 °C | 63 %RH | 4 V | 0 mA | 0 |
| 1791114888 | 29 °C | 63 %RH | 4 V | 0 mA | 0 |
| 1791113133 | 32 °C | 69 %RH | 4 V | 0 mA | 0 |
| 1791111378 | 32 °C | 69 %RH | 4 V | 0 mA | 0 |
| 1791109623 | 32 °C | 69 %RH | 4 V | 0 mA | 0 |
| 1791107868 | 32 °C | 68 %RH | 4 V | 0 mA | 0 |
| 1791106113 | 32 °C | 68 %RH | 4 V | 0 mA | 0 |
| 1791104358 | 32 °C | 67 %RH | 4 V | 0 mA | 0 |
| 1791102603 | 32 °C | 68 %RH | 4 V | 0 mA | 0 |
| 1791100848 | 32 °C | 68 %RH | 4 V | 0 mA | 0 |
| 1791099093 | 31 °C | 68 %RH | 4 V | 0 mA | 0 |
| 1791095583 | 31 °C | 70 %RH | 4 V | 6 mA | 0 |
| 1791093828 | 30 °C | 70 %RH | 4 V | 0 mA | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Voltage: 0, 1, 0
Current: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)