This is the latest recevied telemetry packets stored in our database for station/object LU7FDV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781737183 | 0 Count | 283 Count | 0 Count | 0 VDC | 0 VDC |
| 1781736583 | 0 Count | 283 Count | 0 Count | 0 VDC | 0 VDC |
| 1781735983 | 0 Count | 282 Count | 0 Count | 0 VDC | 0 VDC |
| 1781735383 | 0 Count | 281 Count | 0 Count | 0 VDC | 0 VDC |
| 1781734783 | 0 Count | 281 Count | 0 Count | 0 VDC | 0 VDC |
| 1781734183 | 0 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1781733582 | 0 Count | 272 Count | 0 Count | 0 VDC | 0 VDC |
| 1781732982 | 0 Count | 271 Count | 0 Count | 0 VDC | 0 VDC |
| 1781732382 | 0 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1781731782 | 0 Count | 269 Count | 0 Count | 0 VDC | 0 VDC |
| 1781731182 | 0 Count | 261 Count | 0 Count | 0 VDC | 0 VDC |
| 1781730582 | 0 Count | 261 Count | 0 Count | 0 VDC | 0 VDC |
| 1781729982 | 0 Count | 261 Count | 0 Count | 0 VDC | 0 VDC |
| 1781729382 | 0 Count | 261 Count | 0 Count | 0 VDC | 0 VDC |
| 1781728781 | 0 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1781728181 | 0 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1781727581 | 0 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1781726981 | 0 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1781726381 | 0 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1781725781 | 0 Count | 259 Count | 0 Count | 0 VDC | 0 VDC |
| 1781725181 | 0 Count | 258 Count | 0 Count | 0 VDC | 0 VDC |
| 1781724581 | 0 Count | 253 Count | 0 Count | 0 VDC | 0 VDC |
| 1781723981 | 0 Count | 253 Count | 0 Count | 0 VDC | 0 VDC |
| 1781723381 | 0 Count | 252 Count | 0 Count | 0 VDC | 0 VDC |
| 1781722781 | 0 Count | 251 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)