This is the latest recevied telemetry packets stored in our database for station/object LU7FDV-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785839338 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785838738 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785838138 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785837538 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785836948 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785836347 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785835747 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785835147 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785834547 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785833947 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785833347 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785832746 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785832146 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785831546 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785830946 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785830346 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785829746 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785829144 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785828543 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785827943 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785827343 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785826743 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785826142 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785825540 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1785824940 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)