This is the latest recevied telemetry packets stored in our database for station/object SP7KGO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786451861 | 572 Count | 900 Count | 452 Count | 3.88 VDC | 0.08 VDC |
| 1786450060 | 567 Count | 898 Count | 450 Count | 3.86 VDC | 0.08 VDC |
| 1786448259 | 560 Count | 893 Count | 445 Count | 3.88 VDC | 0.08 VDC |
| 1786446476 | 556 Count | 890 Count | 443 Count | 3.85 VDC | 0.08 VDC |
| 1786444675 | 552 Count | 888 Count | 441 Count | 3.86 VDC | 0.08 VDC |
| 1786442873 | 544 Count | 882 Count | 435 Count | 3.85 VDC | 0.08 VDC |
| 1786441072 | 540 Count | 880 Count | 433 Count | 3.85 VDC | 0.08 VDC |
| 1786439270 | 537 Count | 878 Count | 431 Count | 3.88 VDC | 0.08 VDC |
| 1786437469 | 532 Count | 876 Count | 429 Count | 3.88 VDC | 0.08 VDC |
| 1786435667 | 529 Count | 874 Count | 427 Count | 3.85 VDC | 0.08 VDC |
| 1786433865 | 525 Count | 872 Count | 425 Count | 3.85 VDC | 0.08 VDC |
| 1786432064 | 521 Count | 870 Count | 423 Count | 3.85 VDC | 0.08 VDC |
| 1786430262 | 516 Count | 868 Count | 421 Count | 3.85 VDC | 0.08 VDC |
| 1786428461 | 512 Count | 866 Count | 419 Count | 3.89 VDC | 0.08 VDC |
| 1786426659 | 508 Count | 847 Count | 417 Count | 3.86 VDC | 0.08 VDC |
| 1786424876 | 504 Count | 807 Count | 415 Count | 3.84 VDC | 0.08 VDC |
| 1786423075 | 500 Count | 745 Count | 412 Count | 3.86 VDC | 0.08 VDC |
| 1786421273 | 488 Count | 715 Count | 403 Count | 3.86 VDC | 0.08 VDC |
| 1786419472 | 484 Count | 713 Count | 401 Count | 3.86 VDC | 0.08 VDC |
| 1786417671 | 481 Count | 712 Count | 400 Count | 3.86 VDC | 0.08 VDC |
| 1786415869 | 477 Count | 707 Count | 398 Count | 3.85 VDC | 0.08 VDC |
| 1786414068 | 473 Count | 704 Count | 396 Count | 3.85 VDC | 0.08 VDC |
| 1786412266 | 469 Count | 702 Count | 394 Count | 3.89 VDC | 0.08 VDC |
| 1786410464 | 464 Count | 698 Count | 391 Count | 3.89 VDC | 0.08 VDC |
| 1786408663 | 460 Count | 696 Count | 389 Count | 3.86 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)