This is the latest recevied telemetry packets stored in our database for station/object SP7WOJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791098935 | 755 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791095340 | 749 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791093538 | 748 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791091736 | 744 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791089935 | 743 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791088135 | 742 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791086334 | 738 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791084533 | 737 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791082738 | 733 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791080937 | 732 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791079137 | 728 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791077336 | 727 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791075535 | 726 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791073735 | 722 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791071933 | 721 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791070132 | 717 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791068337 | 716 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791066536 | 712 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791064735 | 711 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791062935 | 708 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791061134 | 706 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791059333 | 705 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791057532 | 701 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791055732 | 700 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1791053937 | 696 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)