This is the latest recevied telemetry packets stored in our database for station/object SV2HQL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775209233 | 15.4 C | 1011 hPa | 0 | 0 | 0 |
| 1775209118 | 19.8 C | 1010.5 hPa | 0 | 0 | 0 |
| 1775209094 | 19.8 C | 1010.88 hPa | 0 | 0 | 0 |
| 1775208949 | 18.9 C | 1010.75 hPa | 0 | 0 | 0 |
| 1775208925 | 18.9 C | 1011.13 hPa | 0 | 0 | 0 |
| 1775208849 | 19 C | 1010.63 hPa | 0 | 0 | 0 |
| 1775208825 | 18.7 C | 1009.63 hPa | 0 | 0 | 0 |
| 1775208801 | 18.7 C | 1010.25 hPa | 0 | 0 | 0 |
| 1775208775 | 17.7 C | 1009.75 hPa | 0 | 0 | 0 |
| 1775208751 | 17.7 C | 1011.5 hPa | 0 | 0 | 0 |
| 1775208727 | 17.7 C | 1010 hPa | 0 | 0 | 0 |
| 1775208396 | 18.2 C | 1010.25 hPa | 0 | 0 | 0 |
| 1775207462 | 17.8 C | 1008.88 hPa | 0 | 0 | 0 |
| 1775206558 | 18.1 C | 1008.63 hPa | 0 | 0 | 0 |
| 1775205654 | 18.4 C | 1009.63 hPa | 0 | 0 | 0 |
| 1775203846 | 18.3 C | 1010.5 hPa | 0 | 0 | 0 |
| 1775201117 | 16.7 C | 945.75 hPa | 0 | 0 | 0 |
| 1775195342 | 17.6 C | 1008 hPa | 0 | 0 | 0 |
| 1775194438 | 17.5 C | 1009.63 hPa | 0 | 0 | 0 |
| 1775192630 | 17.6 C | 1009.75 hPa | 0 | 0 | 0 |
| 1775191726 | 18.2 C | 1010.13 hPa | 0 | 0 | 0 |
| 1775190822 | 18 C | 1008.25 hPa | 0 | 0 | 0 |
| 1775189918 | 18 C | 1009.75 hPa | 0 | 0 | 0 |
| 1775189014 | 18.1 C | 1009.63 hPa | 0 | 0 | 0 |
| 1775188110 | 18.1 C | 1007 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)