This is the latest recevied telemetry packets stored in our database for station/object AJ7LB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791130819 | 28.8 C | 41.31 % | 1015.75 hPa | 0 | 0 |
| 1791127816 | 28.6 C | 42 % | 1015.38 hPa | 0 | 0 |
| 1791124813 | 28.3 C | 42.15 % | 1016.38 hPa | 0 | 0 |
| 1791121811 | 28.1 C | 42.21 % | 1015.38 hPa | 0 | 0 |
| 1791118808 | 28.2 C | 42.41 % | 1015.38 hPa | 0 | 0 |
| 1791115806 | 28.4 C | 41.85 % | 1014.13 hPa | 0 | 0 |
| 1791112803 | 28.5 C | 41.85 % | 1014.5 hPa | 0 | 0 |
| 1791109800 | 28.4 C | 41.85 % | 1014.25 hPa | 0 | 0 |
| 1791103795 | 28.2 C | 42.7 % | 1013.75 hPa | 0 | 0 |
| 1791100792 | 28 C | 44.41 % | 1014 hPa | 0 | 0 |
| 1791097790 | 28.3 C | 44.9 % | 1013.88 hPa | 0 | 0 |
| 1791094786 | 28.7 C | 43.16 % | 1013.88 hPa | 0 | 0 |
| 1791091783 | 28.5 C | 40.9 % | 1013.75 hPa | 0 | 0 |
| 1791088802 | 30.9 C | 39.58 % | 968.75 hPa | 0 | 0 |
| 1791078613 | 33.6 C | 37.51 % | 967.25 hPa | 0 | 0 |
| 1791071689 | 27.6 C | 35.4 % | 1010 hPa | 0 | 0 |
| 1791069491 | 42.2 C | 30.56 % | 1011.5 hPa | 0 | 0 |
| 1791062001 | 36.9 C | 34.79 % | 1011.38 hPa | 0 | 0 |
| 1791052991 | 32.4 C | 41.06 % | 1013.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)