This is the latest recevied telemetry packets stored in our database for station/object KA7PHJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786754837 | 479 | 801 | 0 | 0 | 0 |
| 1786754722 | 482 | 801 | 0 | 0 | 0 |
| 1786754715 | 482 | 799 | 0 | 0 | 0 |
| 1786754677 | 481 | 801 | 0 | 0 | 0 |
| 1786754668 | 482 | 799 | 0 | 0 | 0 |
| 1786754587 | 483 | 803 | 0 | 0 | 0 |
| 1786754497 | 483 | 805 | 0 | 0 | 0 |
| 1786754406 | 482 | 808 | 0 | 0 | 0 |
| 1786754316 | 481 | 815 | 0 | 0 | 0 |
| 1786754226 | 481 | 819 | 0 | 0 | 0 |
| 1786754135 | 483 | 827 | 0 | 0 | 0 |
| 1786754045 | 482 | 829 | 0 | 0 | 0 |
| 1786753955 | 476 | 831 | 0 | 0 | 0 |
| 1786751900 | 482 | 807 | 0 | 0 | 0 |
| 1786751895 | 482 | 807 | 0 | 0 | 0 |
| 1786751890 | 477 | 808 | 0 | 0 | 0 |
| 1786751886 | 482 | 807 | 0 | 0 | 0 |
| 1786751881 | 483 | 808 | 0 | 0 | 0 |
| 1786751876 | 482 | 807 | 0 | 0 | 0 |
| 1786751836 | 481 | 808 | 0 | 0 | 0 |
| 1786751746 | 481 | 809 | 0 | 0 | 0 |
| 1786751656 | 478 | 811 | 0 | 0 | 0 |
| 1786751571 | 482 | 813 | 0 | 0 | 0 |
| 1786751481 | 482 | 817 | 0 | 0 | 0 |
| 1786751391 | 477 | 821 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)